Welcome to Barnakl. Let's get you set up.
Watch the video or follow the steps below. It only takes a few minutes.
What’s In
The Starter Kit
How to Install
Clean
01
Clean the top of each ceiling fan blade thoroughly. A dust-free surface helps the adhesive bond.
Stick
02
Peel the adhesive strip off the Pearl clip base. Line it up with the template and press it firmly onto the blade.
Slide
03
Let the adhesive set for 10 minutes, then grab a filter from the bag and slide it into the Pearl clip.
Breathe Easy
04
That's it. Swap in fresh filters every 60 days and you're set.
You're Set for 60 Days
When it's time for fresh filters, everything you need is right here.
Manage Your Subscription
Change your delivery date, address, or plan anytime.
Manage Subscription
Log in with your email. No password needed.
Frequently Asked Questions
How long does setup take?
Just a few minutes of hands-on time per fan. Clean the blades, press on the Pearl clips, let the adhesive set for 10 minutes, then slide in your filters.
Can I turn my fan back on right away?
Yes. Once the adhesive has set for 10 minutes and your filters are clipped in, your fan is ready to run at any speed.
What if the clip won't stick to my blade?
Adhesion issues almost always come down to surface prep. Make sure the blade is completely clean and dry before applying, and press the clip firmly for a few seconds. If you have a delicate or painted finish, test on a small area first. Still stuck? Reach out to our support team and we'll make it right.
No. Pearl clips and filters are lightweight and designed for ceiling fan use. Install one on every blade using the template so the weight stays even, and your fan will run just like before.
Will the adhesive damage my fan blades?
Barnakl uses a quality adhesive made for ceiling fan surfaces, and with Pearl you only stick once. The adhesive lives on the clip base, so filter swaps are a simple slide in, slide out with no peeling from your blade.
Does Barnakl have a smell?
No. Barnakl filters are unscented. Activated coconut carbon traps odor molecules rather than masking them, so the only change you should notice is fresher air.
When do I swap filters, and when will my first refill arrive?
Swap your filters every 60 days. If you subscribed, your refill pack ships automatically so fresh filters arrive before swap day. Bought a one-time kit? Grab refills anytime from the Shop Refills button above.
Over 300,000+ Happy Customers
Cleaner air starts with your fan